24'x42' Elite Flex Spring Kit
Share!

24'x42' Elite Flex Spring Kit

By GMR
We're sorry, this item is not available.
Elite Flex Spring Kit 24'x42'. Requires 32 sheets 7/16"OSB and 5/8" BC. Please use the quote button to request motor freight charges. The 24'x42' Elite Flex Spring Floor Kit features 2" x 4" oil tempered springs which attach with an innovative plastic cap. Each 4'x8' panel has 28 springs. The top layer is 7/16" OSB board and the bottom layer is 5/8" BC plywood. The two layers are staggered and held together with drop in pins. This system allows the floor to "float." Panels are able to flex without resistance, thereby giving maximum lift for all size gymnasts. The Elite Flex Spring Floor is resilient for your "little" gymnast as well as your "big" gymnast. The floor easily assembles in approximately 8 hours with instructions geared towards the booster club production line. The flex spring floor includes: springs, 2 caps per spring, machine screws, T-nuts, drop-in pins, jig, template and complete easy to follow instructions. Requires 32 sheets of 5/8" BC plywood and 32 sheets of 7/16" OSB which is not included. Spring floor requires 4 rolls of carpet bonded foam. In 1986 By GMR was the first to develop the 2"x4" Elite spring and revolutionized spring floors. Equal to the Palmer Power Spring Floor. Please use the quote button to request motor freight charges.
Elite Flex Spring Kit 24'x42'. Requires 32 sheets 7/16"OSB and 5/8" BC. Please use the quote button to request motor freight charges. The 24'x42' Elite Flex Spring Floor Kit features 2" x 4" oil tempered springs which attach with an innovative plastic cap. Each 4'x8' panel has 28 springs. The top layer is 7/16" OSB board and the bottom layer is 5/8" BC plywood. The two layers are staggered and held together with drop in pins. This system allows the floor to "float." Panels are able to flex without resistance, thereby giving maximum lift for all size gymnasts. The Elite Flex Spring Floor is resilient for your "little" gymnast as well as your "big" gymnast. The floor easily assembles in approximately 8 hours with instructions geared towards the booster club production line. The flex spring floor includes: springs, 2 caps per spring, machine screws, T-nuts, drop-in pins, jig, template and complete easy to follow instructions. Requires 32 sheets of 5/8" BC plywood and 32 sheets of 7/16" OSB which is not included. Spring floor requires 4 rolls of carpet bonded foam. In 1986 By GMR was the first to develop the 2"x4" Elite spring and revolutionized spring floors. Equal to the Palmer Power Spring Floor. Please use the quote button to request motor freight charges.
We Also Suggest
Recently Viewed
topTop