The 6'x42'Elite Flex Velcro Spring Floor is ideal for permanent set up and features 2" x 4" oil tempered springs which attach with an innovative plastic cap. Each 4'x6' panel has 24 springs. The top layer is 7/16" OSB board and the bottom layer is 5/8" BC plywood. The two layers are staggered and bolted together on the perimeter. This Spring strip requires 1 roll of carpet bonded foam or Trocellan foam with Flex carpet. In 1986 By GMR was the first to develop the 2"x4" Elite spring and revolutionized spring floors. Equal to the Palmer Power Spring Floor. Please use the quote button to request motor freight charges.
Any activity involving motion or height creates the possibility of catastrophic injury, paralysis or even death. This equipment is intended for use ONLY by properly trained and qualified participants under supervised conditions. Use without proper supervision or abuse, could be DANGEROUS and should NOT be undertaken or permitted. Before using, KNOW YOUR LIMITATIONS and the limitations of this equipment. If in doubt always consult your instructor. Always inspect for loose fittings or damage and test stability before each use. Be sure proper matting is in place.