The 30'x42' Elite Flex Spring Floor Kit features 2" x 4" oil tempered springs which attach with an innovative plastic cap. Each 4'x8' panel has 28 springs. The top layer is 7/16" OSB board and the bottom layer is 5/8" BC plywood. The two layers are staggered and held together with drop in pins. This system allows the floor to "float." Panels are able to flex without resistance, thereby giving maximum lift for all size gymnasts. The Elite Flex Spring Floor is resilient for your "little" gymnast as well as your "big" gymnast. The floor easily assembles in approximately 9 hours with instructions geared towards the booster club production line. The flex spring floor includes: springs, 2 caps per spring, machine screws, T-nuts, drop-in pins, jig, template and complete easy to follow instructions. Requires 40 sheets of 5/8" BC plywood and 40 sheets of 7/16" OSB which is not included. Spring floor requires 5 rolls of carpet bonded foam. In 1986 By GMR was the first to develop the 2"x4" Elite spring and revolutionized spring floors. Equal to the Palmer Power Spring Floor. Please use the quote button to request motor freight charges.
Any activity involving motion or height creates the possibility of catastrophic injury, paralysis or even death. This equipment is intended for use ONLY by properly trained and qualified participants under supervised conditions. Use without proper supervision or abuse, could be DANGEROUS and should NOT be undertaken or permitted. Before using, KNOW YOUR LIMITATIONS and the limitations of this equipment. If in doubt always consult your instructor. Always inspect for loose fittings or damage and test stability before each use. Be sure proper matting is in place.
Financing & Leasing
Full Circle Finance gives you options:
- Flexible financing
- Application-only up to $75,000
- Exceptional customer service
- Financing for new and used assets
- Terms from 24 to 63 months
Please visit the Full Circle Finance website to learn more about your financing and leasing options.